• LPG Copper Strip Corrosion Test Apparatus

LPG Copper Strip Corrosion Test Apparatus



Tests the corrosiveness of LPG to copper by immersion of a polished test strip in the sample inside a test cylinder at elevated temperature. After one hour the test strip is removed and compared against the ASTM Copper Strip Corrosion Standards.

  • Conforms to ASTM D1838 and related specifications
  • Capacity for 5 samples
  • Consists of LPG Corrosion Test Cylinders, Water Bath, Copper Strips, Polishing Materials, and the ASTM Copper Strip Corrosion Test Standards
LPG Corrosion Test Water Bath

Temperature-controlled water bath submerges five LPG Corrosion Test Cylinders in an upright position. Controls temperature at 100 ± 1°F (37.8 ± 0.5°C) per ASTM specifications. Polished stainless steel inner wall and powder coated steel outer wall construction. Fully insulated.

LPG Corrosion Test Cylinder

Stainless steel cylinder with 1⁄4” needle valves for purging and admitting LPG samples. Dip tube with hook suspends copper strip in sample. Knurled, threaded cap with O-ring gasket hand tightens to a positive seal. Withstands hydrostatic test pressure of 1000 psig (6895 kPa).

Conforms to the Specifications of:

ASTM D1838; GPA 2140; ISO 6251

Capacity:

  • 5 LPG Corrosion Test Cylinders

Temperature:

  • Range: Ambient to 100°F (37.8°C)
  • Control Stability: ±0.09°F (±0.05°C)

Bath Medium:

  • 6.1 gal (23.1 L) water

K64800: 115V 60Hz, Single Phase, 10A

K64890: 220-240V 50/60Hz, Single Phase, 5A

  • K40000 LPG Corrosion Test Cylinder
  • K40200Copper Strip for LPG; 12.5x1.5-3.0mm x 75mm with 3.2mm hole per ASTM specifications
  • K40100 Connecting Tubing
      Sulfur-free plastic-lined tubing for connection of test cylinder valve to sample source.
      With 1⁄4 " stainless steel and aluminum connectors. 24" long
  • K25100 ASTM Copper Strip Corrosion Standards
      Colored reproductions of tarnished strips encased in a plastic plaque
  • 380-240-001 Silicone Carbide Paper, FEPA Grade, 240 grit
      For polishing of copper strips prior to testing - Pack of 50 sheets
  • 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit
      For final polishing of copper strips prior to testing - 1 lb package
  • 380-150-001 Silicone Carbide Paper, FEPA Grade, 150 grit
      For polishing of copper strips prior to testing - Pack of 50 sheets
  • K25000 Polishing Vise
      Holds copper strip firmly in place without marring the edges. Stainless steel, mounted on a composition base
  • K25090 Multi-Strip Polishing Vise
      Similar to K25000 but capable of holding four strips at a time
  • 250-000-12F ASTM 12F Thermometer - Range: –5 to +215°F
  • 250-000-12C ASTM 12C Thermometer - Range: –20 to +102°C